- Messages
- 476
- Reactions
- 27
- State
- AZ
- Country
- United States
- What I Drive
- 2015 Audi S3
I'll come back later an fill in the details, but here are some images that can help with your install.
Tools Needed:
Panel Removal Tool
Add-A-Circuit Fuse Tap Kit
10mm Socket and extra nut
Dash Cam
BlackVue Dash Cam DR650S-1CH - Link to Amazon
Remove the fuse box cover.
Remove the side cover.
Running the wiring
Wiring the camera.
Yellow Wire = 12v, Red Wire = ACC, Black = Ground
F38 and F48 can be used.
F38 has constant power and F48 is for ACC power.
Installing the ground wire.
Mounted camera
Tools Needed:
Panel Removal Tool
![](http://i.imgur.com/MonZUl6.jpg)
Add-A-Circuit Fuse Tap Kit
![](http://i.imgur.com/SiETT9j.jpg)
10mm Socket and extra nut
Dash Cam
BlackVue Dash Cam DR650S-1CH - Link to Amazon
![](http://i.imgur.com/aKxWUTC.jpg)
Remove the fuse box cover.
![](http://i.imgur.com/fXh7soC.jpg)
![](http://i.imgur.com/LBLt28t.jpg)
Remove the side cover.
![](http://i.imgur.com/F0oWtpk.jpg)
![](http://i.imgur.com/uGcp7Zv.jpg)
![](http://i.imgur.com/dbdmIR0.jpg)
![](http://i.imgur.com/dxcqiPn.jpg)
Running the wiring
![](http://i.imgur.com/D45SXA3.jpg)
![](http://i.imgur.com/tryJkPY.jpg)
![](http://i.imgur.com/AlDMUmi.jpg)
![](http://i.imgur.com/rA77UNV.jpg)
![](http://i.imgur.com/jzDg2hO.jpg)
![](http://i.imgur.com/dbO7FjC.jpg)
![](http://i.imgur.com/UvmalYd.jpg)
![](http://i.imgur.com/J9QmOcl.jpg)
![](http://i.imgur.com/arLNU7i.jpg)
Wiring the camera.
![](http://i.imgur.com/dIRtObl.jpg)
![](http://i.imgur.com/5pNpW4z.jpg)
![](http://i.imgur.com/F0m2PNy.jpg)
Yellow Wire = 12v, Red Wire = ACC, Black = Ground
![](http://i.imgur.com/UUpdfQl.jpg)
![](http://i.imgur.com/tfGtkWW.jpg)
F38 and F48 can be used.
F38 has constant power and F48 is for ACC power.
![](http://i.imgur.com/JpWgoll.jpg)
Installing the ground wire.
![](http://i.imgur.com/3EbACQv.jpg)
![](http://i.imgur.com/i5ZB1fF.jpg)
Mounted camera
![](http://i.imgur.com/JqzLQxv.jpg)
![](http://i.imgur.com/tmmqOA3.jpg)